top of page

FST  FloMax™ Replacement Filters:

 

These FloMax™ filters are replacement filters for our FST systems. These spin-on & cartridge filters are only compatible with a specific FST Performance filter head/manifold/base. Use with any other filter head/manifold/base could cause filter damage, fuel leakage, filter bursting, or improper fuel flow and NO warranty.

All filters below are compatible with gasoline, ethanol, methanol, racing fuels, diesel & bio-diesel.

 

To order, please go to the "Order Page" or click on =          

New Marine Replacement - RF51 

Replacement marine fuel filter RF51

New; RF51 FloMax™, 4 micron, MARINE replacement fuel / water separator spin-on filter. Cross from Mercury® Marine (and Racing): 35-1604941, 35-60494, 35-802893Q, 35-802893Q01, 35-802893T, 35-805269, 35-807172, 9-37801, C35-60494A / NAPA: 3225, 3226 / Sierra: 187845, 18-7845, 18-7945 / Wix: 33225, 33226 / Fram: PS3808

​

  • Fits many marine OE (Original Equipment) filter bases-manifolds (including Outboards).

  • 4-micron, water separating FloMax™ enhanced cellulose media.

  • Meets/Passed USCG fire resistance requirement: CFR 183.590 & SAE J1527:2011 

  • 100% US made

  • O.D. 3-11/16"(93.7mm) x Height 3-7/8"(98.4mm)

  • Thread: 11/16-16 

  • Gasket/Seal: OD 2.834"(72mm) / ID 2.462"(63mm) 

  • Burst: 250 psi

  • $26.95 each / 12 per case

​

Calif Prop 65 warning

WARNING: Cancer and Reproductive Harm-

                www.P65Warnings.ca.gov 

Efficient, high-flow
RF300 replacement fuel filters, replaces RF500.
RF500 is now RF300

The RF500 has been replaced by RF300 - is the replacement FloMax™ water-stripping spin-on filter for the RPM300 and RPM350 systems.

 

  • 4 Micron FloMax™ High-flow enhanced cellulose from PRC

  • 183 sq in media surface / Water stripping/separation cellulose

  • Flow = 300 gph / Clean Pressure Drop: (0.15 at 24psi)

  • Thread size is: 3/4 - 16

  • Diameter: 3.09"  (78.5 mm)

  • Height: 3.46"  (88 mm)

  • Weight: 11oz (313g)

  • Gasket/Seal: OD: 2.81" (71.5mm) - ID: 2.42" (61.5mm) 

  • Burst: 250 psi  • Cost: $21.95 each 

  • 12 per Case 

High Flow fuel filters
RF500M

The RF500M is the replacement FloMax™ water-stripping spin-on filter for the RPM500 system.

 

  • 3 Micron, water separating FloMax™ High-flow media.

  • Specific FloMax™ enhanced cellulose media from PRC

  • 579 sq in media surface area / water separation

  • Flow = 315 gph / Clean Pressure Drop: (0.15 at 24psi)

  • Thread size: 1 - 14

  • Diameter: 3.69"

  • Height: 6.59"

  • Gasket/Seal: OD: 2.81" (71mm) - ID: 2.47" (63mm)

  • Burst: 250 psi

  • $33.95 ea /

  • 12 per Case

Calif Prop 65 warning

WARNING: Cancer and Reproductive Harm-

                www.P65Warnings.ca.gov 

Calif Prop 65 warning

WARNING: Cancer and Reproductive Harm-

www.P65Warnings.ca.gov

RF700 replacement fuel filter cartridge for RPM700.
RF700

The RF700 is the replacement FloMax™ water-stripping cartridge filter for the RPM700 in-line system.

 

  • 4 Micron FloMax™ High-flow enhanced cellulose

  • 122 sq in media surface area / water-stripping/separation

  • Viton O-ring

  • $39.95 ea /

  • 12 per Case

Calif Prop 65 warning

WARNING: Cancer and Reproductive Harm-

                      www.P65Warnings.ca.gov

RF900D.jpg 2015-7-28-22:7:7
RF900D

The RF900D is the replacement FloMax™ water-stripping spin-on filter for the  RPM900 TurboFyner™ system.

 

  • 3 Micron FloMax™ High-flow enhanced cellulose

  • 427 sq in media surface area / water separation

  • Flow = (diesel) 250 gph / Clean Pressure Drop: (0.15 at 24psi)

  • Thread size: 1 - 14

  • Diameter: 3.77"

  • Height: 5.28"

  • Gasket/Seal: OD: 2.81" / ID: 2.46"

  • Burst: 250 psi

  • $33.95 ea /

  • 12 per Case

Calif Prop 65 warning

WARNING: Cancer and Reproductive Harm-

                       www.P65Warnings.ca.gov

bottom of page